PU FEST 2K microcement sealer
Floors, walls and countertops covered with microcement are mostly used in representative locations (guest rooms, conference rooms) as well as places subject to heavy dirt (kitchen) or constant contact with water (bathrooms, swimming pools). Although microcement does not absorb water, we recommend protecting it with a microcement sealer that will improve its appearance and durability as well as will make cleaning easier. Much like applying a stain guard to a new couch or waxing your cherished car, sealing a concrete floor is critical for protecting your investment.
Aesthetics, protection, durability and easy maintenance – these three factors led FESTFLOOR to choose PU FEST 2K as the best microcement sealer for FESTFLOOR systems. The varnish is a top-quality solution meeting the most exigent expectations.
PU FEST 2K is a two-component, water-based polyurethane product for long term floor protection. It reduces dirt adhesion, so that warm water is enough for day-to-day floor maintenance. The product gives it chemical and mechanical resistance and the choice is a satin, matt or gloss finish. Thanks to that your Béton ciré floor will continue to impress with design and quality for years and years.
Application of PU FEST 2K
Obviously, PU FEST 2K is not only a product for the protection of microcement. It can also be used for finishing floors made of other materials such as:
- Epoxy floors,
- Polyurethane flooring,
- PVC coverings,
- Wooden floors.
PU FEST 2K is supplied in two components. Shake well before use. Mix sealer (Component A) and hardener (Component B) in a ratio of 5:1. After mixing the two ingredients wait 10 minutes and then stir again. The mixed product in a sealed package is ready for use for about 2 hours. After application, when the product is dry to touch (about 2h), apply the second coat in the same way as the first one.
- The surface must be dry, clean and dust-free,
- Floor and sealer temperature during application and drying >15°C
Another coat of sealer can be applied after about 2 hours. The second layer of PU FEST 2K sealer should be applied not later than 12 hours after applying the first coat.
PU FEST 2K achieves 80% of its strength after 24 hours, and its full durability after 7 days (20°C, 50% humidity). Low temperatures, high humidity as well as poor ventilation can lengthen sealer’s bonding process. Therefore, during the first 10-14 days be careful while moving furniture or heavy objects on the floor.
Additionally, for the first 7 days sealer should not be exposed to water.
Consumption – about 0.1 kg/m2
The product should be protected from frost and stored in a cool, dry place. Best before 12 months from the date of production (in its closed original container). Keep out of reach of children.
You can buy the product separately in our store but we also supply it as a apart of microcement kit, e.g.
Kit for applying 10 m² of microcement FLOOR , Kit for applying 15 m² of microcement WALL or Kit 10 m² of ready-to-use microcement FLOOR system . Choose whatever is suitable for you.